5 km Range

Weightless delivers the longest possible range for low-power IoT/M2M products.

A Weightless network typically has a range of up to 5km (3 miles) in an urban environment and usually significantly more in a rural setting. This depends on the specifics of the environment such as topography, building density, construction materials, antenna siting etc.

Weightless delivers the longest possible range for IoT/M2M products. Many short-range technologies including Wi-Fi, Bluetooth, ZigBee and others aspire to play a role in the IoT/M2M ecosystem. However, islands of coverage provided by short range technologies such as Wi-Fi and Bluetooth are not an option. LAN and PAN technologies cannot provide the coverage needed for applications such as automotive, sensors, asset tracking, healthcare and many more. Instead, they are restricted to machines connected within the home or office environments.

Even in these environments there are many good reasons why a wide-area solution is preferable. For example, an electricity supply company is unlikely to accept that its meter is only connected via, e.g. Wi-Fi, into a home network, which in turn connects to the home broadband.

Long range, in-building penetration

Coverage is typically more important than data rate in most IoT use-cases. Radio signals in the lower frequency bands go further. Weightless technology is frequency agnostic but is typically deployed in sub-1GHz spectrum. Weightless-N operates in ISM frequency bands – 868MHz in Europe, 915MHz in the US for example, and Weightless-W operates in TV white space, a perfect low frequency band. This low frequency spectrum enables excellent propagation, at low power, and without needing inconveniently large or expensive antennas in terminal devices.

Superior propagation to cellular networks is a good starting point, but IoT/M2M signals need to penetrate deep within homes and other buildings. Smart meters, for example, are often in basements. Coverage, access to all meters in a network, is more important than data rate to a utility company. Most buildings have a penetration loss for signals entering them of around 15-20dB; techniques used in the Weightless system design provide indoor coverage to machines where only outdoor coverage previously existed.

Propagation characteristics make for the perfect M2M network solution

Range not only affects network performance, but overall costs, too. Weightless’ ubiquitous coverage and extended range directly impacts on the cost of establishing IoT/M2M networks. As a result of the need to deploy relatively few cells, set-up costs are minimised for network operators.

These design considerations make M2M networks radically different in many respects from traditional telephony based technologies. The Weightless-N standard for ISM and Weightless-W standard for TV white space spectrum meet all of the requirements for IoT/M2M communications, including range and in-building penetration.

What's next?

We are continuously updating information about the urban and rural range of Weightless networks including the results of real world testing as new networks are deployed. We also have a full schedule of hardware developments to roll out over the course of the next few weeks and months including new base stations, modules, endpoints, development kits, and evaluation kits - as well as new standards and enhancements to existing standards. To keep right up to speed on all the latest developments as they happen, please click on the orange "Send me breaking news" button in the banner above.